If your package arrives visibly damaged, or if you experience any issue with the device, please contact us as soon as possible with photos and a description of the problem.
We will work directly with you to understand the issue and find the best possible solution quickly and professionally.
Yes. We provide guidance for installation, setup, calibration, and accessory configuration.
Because the products are designed by active motorsport professionals, our support is focused on real rally use cases and practical solutions rather than generic customer service responses.
Complete user manuals and setup documentation are available online here: CLOSER GPS Manuals.
Our philosophy is based on quality, motorsport experience, and direct product control.
Rather than mass-producing generic electronics, we develop and prepare devices specifically for rally crews, drivers, co-drivers, and motorsport enthusiasts who value reliability, practicality, and carefully engineered solutions created by people from within the rally world itself.
A GPS rally tripmeter gives drivers and co-drivers a precise and constantly updated distance reference without requiring wheel sensors or complex installations.
In rallying, accurate distance measurement is essential for writing precise pace notes, following roadbooks, respecting timing controls, and staying synchronized during stages and recce sessions. A dedicated tripmeter helps reduce errors and improves consistency compared to relying only on the vehicle’s standard odometer.
CLOSER GPS devices are designed specifically for motorsport use, combining simplicity, precision, and practical rally-focused functions in a compact format.
During recce, the driver can use the tripmeter to objectively measure distances between corners fundamental to evaluate the braking points, crests, junctions, and references while creating or refining pace notes.
Because the measurement is digital and GPS-based, it helps maintain consistency and accuracy throughout the entire stage. The ability to instantly reset distances, reverse direction, or switch between meters and kilometers makes note creation significantly faster and more reliable.
This approach is also part of the Caneva Method taught during the courses of the Vittorio Caneva Rally School. The tripmeter is used together with conjunctions and structured note systems to create coherent and repeatable distance references that can easily also be shared between reconnaissance crews, drivers, and co-drivers.
For co-drivers, the tripmeter becomes a key navigation and synchronization tool.
It helps following roadbook references, checking official distances, monitoring liaison sections, managing timing controls, and keeping pace notes synchronized with the actual road position during special stages.
Functions such as Speed Alert, stopwatch timing, dual tripmeters (V2), and GPS official time provide additional support during competitive rally conditions.
The Rally Tripmeter V1 is designed around essential rally functionality:
- GPS tripmeter
- Speedometer
- Stopwatch
- GPS official timing
- Speed Alert
The Rally Tripmeter V2 expands the functionality further with:
- GPS dual independent tripmeters
- Special stage timing logs
The V1 is ideal for crews looking for a simple, lightweight, and highly effective rally tripmeter, while the V2 is better suited for users wanting more advanced rally measuring, a Codriver device, and timing functions in a compact device.
Yes. One of the main goals behind the project was creating devices that are extremely intuitive even in stressful rally environments.
Large tactile buttons, fast-access functions, simple menus, and clear displays allow drivers and co-drivers to operate the device quickly without distraction.
The “power it and play” philosophy means there are no wheel probes, no external GPS antennas, and no complicated startup procedures.
Each device arrives as a complete ready-to-use package including:
- Rally Tripmeter device
- Protective travel case
- RAM-B mounting support
- Mounting screws
- Allen key
- USB-C power cable
- Quick access documentation card
Everything is designed to allow fast installation and practical transport between recce cars, race cars, and workshop environments.
The Recce Kit was created specifically for reconnaissance vehicles and temporary installations.
It includes the essential accessories needed to quickly install the tripmeter in road cars used during recce sessions, including solutions such as windshield suction mounting systems for fast, non-permanent installation.
The goal of the kit is portability, flexibility, and ease of use during intense recce schedules.
The Test Kit is designed for rally cars, race cars, and dedicated motorsport testing vehicles.
It includes mounting accessories optimized for competition environments, including roll-bar mounting solutions that allow secure installation inside race-prepared cockpits.
The kit is intended for crews and teams wanting a stable and professional setup during testing, development sessions, and rally events.
CLOSER GPS offers a growing range of rally-focused accessories designed to improve usability, ergonomics, and safety during competition and recce.
Available accessories include:
- Remote Tripmeter Reset Buttons
- Visual & Acoustic Speed Alert systems
- RAM mounting solutions
- Roll-bar mounts
- Recce installation accessories
- Custom wiring options
All accessories are designed specifically around real rally use cases.
The Remote Tripmeter Reset Buttons allow drivers or co-drivers to reset trip distances without directly touching the main device.
They are available in different versions:
- Direct jack connector versions
- Wiring versions for custom installations
- Motorsport-oriented mounting configurations
These accessories improve ergonomics and allow crews to keep their attention focused on driving and note reading.
The Visual & Acoustic Speed Alert is an additional warning system designed for liaison sections, speed-controlled zones, and recce driving.
When the configured speed limit is exceeded, the system provides stronger visual feedback and audible warnings, helping crews stay aware of speed restrictions without constantly monitoring the display.
This can be especially useful during long liaison sections or in rallies with strict speed enforcement.
Closer was born directly from motorsport experience and rally operations.
The project was developed by people actively involved in rallying, with the goal of creating practical and reliable tools designed around real-world competition needs, not generic navigation electronics adapted afterward for motorsport.
Every function, accessory, and installation solution was designed to simplify rally operations, improve usability, and provide professional-level functionality at an accessible price point.
CLOSER GPS tripmeters are designed around a “power it and play” philosophy. Unlike traditional systems that require wheel sensors, probes, or complex calibration during installation, CLOSER devices use a high-sensitivity integrated GPS receiver for distance, speed, and official time calculations.
What truly makes CLOSER different is that the project was created by motorsport professionals for motorsport professionals. The devices were developed directly from real rally experience, with attention not only to performance, but also to practical details that make life easier during competition, recce, and daily use.
Another key advantage is value: CLOSER devices deliver advanced rally functions at a significantly more accessible price point compared to many competing systems offering similar capabilities.
No. Both the Rally Tripmeter V1 and V2 feature a built-in high-sensitivity GPS receiver with integrated internal GPS antenna, meaning no external GPS antenna or wheel sensor is required.
This results in a much cleaner installation, fewer exposed components, improved reliability, and faster setup compared to systems that rely on external GPS modules or wheel probes.
The devices are engineered specifically for rally use and allow distance calibration against official roadbook distances for maximum precision. Combined with fast GPS acquisition and rally-focused software logic, they deliver highly consistent measurements for pace notes, recce, liaison sections, and time controls.
The Rally Tripmeter V1 focuses on essential rally functions such as GPS tripmeter, stopwatch, speedometer, and GPS official timing. The V2 expands functionality with dual tripmeters, special stage timing logs, and enhanced stage management tools.
The V2 is especially suited for crews looking for advanced rally measuring functionality in a compact device.
Yes. The devices are specifically designed to support pace note work, recce sessions, and roadbook navigation. The ability to instantly reset distances, reverse counting direction, and switch between meters and kilometers makes them extremely practical during note writing and verification.
In normal conditions, satellite lock is typically achieved within about 30 seconds. During a cold start or after moving the device long distances while powered off, acquisition may take a few minutes.
Once the first GPS lock has been completed, subsequent startups are usually almost instantaneous, allowing the device to be ready for use very quickly during rally operations.
For best performance, the unit should be mounted with a clear view of the sky.
Absolutely. Thanks to the ultra-low power consumption, both V1 and V2 can operate for extremely long periods using modern USB-C power banks, in many cases even for multiple days, depending on the battery capacity used.
This makes them ideal not only for race cars, but also for recce vehicles, training sessions, testing, endurance events, and portable installations where continuous power availability is important.
Both devices include an internal capacitor system that acts as a temporary backup power reserve. This prevents unwanted shutdowns during voltage drops, engine cranking, or brief cable disconnections, helping maintain stable operation during critical rally situations.
Yes. CLOSER tripmeters support external remote buttons through dedicated wiring connections and accessories. This allows drivers and co-drivers to reset trips or control functions without taking their eyes off the road, improving ergonomics and safety during competition.
Yes. Both V1 and V2 include a configurable Speed Alert system designed for liaison sections, service parks, and speed-controlled areas. When the set speed is exceeded, the display flashes, and optional accessories can provide additional visual and acoustic warnings.
Yes. CLOSER GPS products are developed with input from professional drivers, engineers, and rally specialists, and are tested in real-world motorsport conditions. The compact construction, RAM-B compatibility, rugged mounting system, and low power requirements make them suitable for both amateur and professional rally applications.
Yes. Both devices feature manual calibration settings that allow crews to align measured distances with official rally roadbook references. This is particularly important for maintaining accurate pace notes and synchronization during competitive stages.
Our tripmeters are compatible with RAM-B mounting systems and feature rear threaded inserts for secure installation. They can be mounted using windshield suction systems, dashboard bases, or roll-bar clamps depending on the vehicle setup and crew preferences.
Yes. One of the V2’s advanced features is its Special Stages Timing Log, which allows crews to browse and review saved special stage times directly on the device. Up to 30 stage times can be stored and recalled.
Definitely. While developed for serious motorsport use, the interface has been intentionally designed to remain intuitive and fast to learn. Large tactile buttons, quick-access functions, simple menu navigation, and instant startup logic make the devices accessible even for crews approaching rally navigation for the first time.
CLOSER GPS devices combine Japanese electronic engineering with Italian assembly and motorsport expertise.
The electronic components and core hardware are produced in Japan, while final assembly, testing, and quality control are carried out in Italy by our team.
This approach allows us to combine reliability, precision engineering, and direct motorsport-focused quality control on every unit.
Yes. Every single device is individually tested before being packaged and shipped.
We carefully verify GPS functionality, display operation, buttons, power management, and core functions to ensure each unit is fully operational and ready for rally use upon arrival.
As a small and specialized motorsport company, we personally handle every shipment with great attention and care.
We organize shipments in scheduled batches throughout the week.
Orders are grouped and typically shipped once per week through professional courier services.
This allows us to carefully prepare, test, package, and inspect every device before dispatch rather than relying on fully automated warehouse handling.
Once your order is shipped, tracking information will be provided whenever available.
We aim to ship worldwide through international courier partners.
Shipping availability may vary depending on destination country and local import regulations.
If your country is not listed during checkout, feel free to contact us directly and we will do our best to find a shipping solution.
Delivery times depend on the destination country and the courier service used.
Because every unit is assembled, checked, and tested individually, shipping may require a few additional days compared to mass-produced consumer electronics, but this process ensures the highest level of reliability and quality control.
Estimated delivery times are communicated during order confirmation whenever possible even sharing the tracking code.
CLOSER GPS is a specialized independent motorsport project, not a mass-production electronics brand.
We prefer dedicating time to carefully testing, packaging, and preparing every device correctly rather than prioritizing high-volume automated shipping. This approach helps us maintain the quality standards expected in demanding rally environments.
All CLOSER GPS devices include a standard limited warranty covering manufacturing defects and hardware malfunctions under normal intended use.
The warranty does not cover accidental damage, improper installation, unauthorized modifications, misuse, or damage caused by incorrect power supply connections.
Need Detailed Setup Instructions?
Looking for installation guides, wiring diagrams, setup procedures, calibration instructions, or advanced device functions? Visit our dedicated Manuals section to access the latest official documentation for all Closer devices and accessories.
All manuals are regularly updated to provide the most accurate information for installation, configuration, and rally use.